If your AuctionFlex primary and secondary computers won’t connect or can’t see each other on the network, start here. The basic checklist fixes most connection issues.
Find your problem
The mapped drive shows a red X: see “Mapped drive shows a red X.”
The primary computer doesn’t appear under Network: see “Primary computer doesn’t appear on the network.”
You see an error message, such as Network Error 1208 or “An extended error has occurred”: see Fix Network Drive Mapping Errors in AuctionFlex, after you finish the basic checklist.
Mapped drive shows a red X
A red X means the drive lost its connection to the primary computer. Try this first.
In File Explorer, select This PC.
Double-click the drive with the red X. Windows reconnects it.
If it doesn’t reconnect, repeat the sharing settings in Step 1 - Set Up Your Computers for a Network. Windows updates can reset them.
If it still doesn’t reconnect, run the basic checklist below.
Note: If you selected Reconnect at sign-in when you mapped the drive, Windows also reconnects it each time you sign in.
Basic checklist
Run through these checks before you troubleshoot a specific error. Most connection issues trace back to one of them.
Note: The primary computer and every secondary computer must be on the same local network for any of these steps to work.
Check network and sharing settings
On both computers, open Network and Sharing Center. Confirm both show the same network.
Select Change advanced sharing settings, then expand Private, Public and All Networks.
Confirm these settings:
Confirm the AuctionFlex folder has read and write access
On the primary computer, open the C: drive and right-click the AuctionFlex folder.
Select Show more options, then Give access to > Specific people.
Confirm the folder is shared with Everyone, and that Everyone has both Read and Write permissions.
Set both computers’ network type to Private
Both computers need a Private network profile, not Public.
On Windows 11:
Go to Start > Settings.
Select Network & internet.
Select Wi-Fi or Ethernet, depending on how you connect.
Select your active connection, or its Properties.
Under Network profile type, select Private.
On Windows 10:
Go to Start > Settings.
Select Network & Internet.
In the left pane, select Ethernet or Wi-Fi, then select your connected network’s name.
Under Network profile, switch from Public to Private.
Check your antivirus software
Third-party antivirus software can block your AuctionFlex computers from talking to each other. If you use one of these, add an exception for AuctionFlex: Bitdefender, Norton 360, Malwarebytes, McAfee or Avast.
Note: AuctionFlex and HiBid aren’t responsible for problems caused by antivirus software, but an exception usually fixes the connection.
Check your AuctionFlex version
If you’re running AuctionFlex version 9.19 or older, confirm SMB2 is turned on in the Registry on the primary computer. See Step 2 - Set Up the Primary Computer on a Network.
Run a quick connectivity test
On the secondary computer, open File Explorer and go to
\\NameOfYourPrimaryComputer\auctionflex\. If a prompt asks for credentials, try admin / admin, admin / nopassword, or leave the password blank.Open Command Prompt and run
ping NameOfYourPrimaryComputer. If that fails, ping the IP address instead, such asping 192.168.1.15. Use your real IP address.
Important: Finish this checklist before you move to a specific error. Network Discovery must be on, and both computers must be set to Private.
Primary computer doesn’t appear on the network
If the primary computer doesn’t show up under Network in File Explorer on the secondary computer, follow these steps. Computers can prefer one network connection over another, so you first need the IP address of the connection you want to use.
Find your network adapter’s IP address
Select Start, type
CMD, then open Command Prompt.Type
ipconfig, then press Enter. This lists every network adapter, even ones you aren’t using.Find your Ethernet adapter and note its IPv4 Address.
If you only connect over Wi-Fi, AuctionFlex isn’t supported over a wireless connection. Note the Wireless LAN adapter IPv4 address for now, and plan to switch to a wired Ethernet connection.
Run a ping test
On the secondary computer, open Command Prompt and run
ping NameOfYourPrimaryComputer. If the name fails, ping the IP address instead.From the primary computer, ping the secondary computer the same way.
If a ping fails, confirm both computers are set to Private, then try again.
A successful ping shows replies from an address such as 192.168.x.x. A failed ping says “Ping request could not find host” followed by the computer name.
Important: If every ping fails, by name and by IP address, in both directions, the problem is most likely your physical network: cables, router, switch or Ethernet ports. Check your hardware.
If your problem continues
If you still see an error message after the checklist, see Fix Network Drive Mapping Errors in AuctionFlex.






