Skip to main content

Fix Network Drive Mapping Errors for AuctionFlex

Learn how to fix the error messages that appear when you map or open the AuctionFlex network drive.

These errors usually appear when you map or open the AuctionFlex network drive from a secondary computer. Find your error below.

Before you start

Finish the basic checklist in Troubleshoot AuctionFlex Network Connections. Most connection issues are fixed there, and each fix below assumes the computers are on the same network and set to Private.

Find your error

  • You're asked for a username and password, or see Network Error 1208: see "Credential prompt or Network Error 1208."

  • "A specified logon session does not exist": see that section.

  • "You cannot access this shared folder because your organization's security policies block unauthenticated guest access": see "Guest access blocked by security policy."

  • "The specified network name is no longer available": see that section.

  • "An extended error has occurred": see that section.

  • "OLE IDispatch exception code 0": see that section.

Credential prompt or Network Error 1208

You see Network Error 1208, or you're asked for credentials even though Password Protected Sharing is off. First confirm that Password Protected Sharing is actually off. If it is and the prompt keeps appearing, try these.

If you sign in with a Microsoft account

A Windows Hello security policy may be blocking the connection, and credentials fail with "Invalid login."

  1. On the primary computer, go to Settings > Accounts > Sign-in options.

  2. Under Additional settings, turn off "For improved security, only allow Windows Hello sign-in for Microsoft accounts on this device."

Credentials to try at the prompt

  1. Try admin with the password admin.

  2. Try admin with the password nopassword.

  3. Try admin with a blank password.

  4. If none work, clear the username field and enter ComputerName\username, for example Laptop_Primary\admin.

Tip: Entering the computer name before the username can get you past the prompt even when the shared credentials don't work. It also helps find out why AuctionFlex is asking for credentials.

If a specific error appears after you enter credentials, use the matching section below.

"A specified logon session does not exist"

A credential prompt appears when you connect to the primary computer, and any credentials you enter return this error: "A specified logon session does not exist. It may already have been terminated." It appears even with Password Protected Sharing off.

  1. Clear the username field. Don't type just admin or a plain username.

  2. Enter the username with the computer name first, for example Laptop_Primary\admin.

  3. For the password, try admin, nopassword or a blank password.

  4. Once you're in, check the share permissions and confirm the Everyone group has both Read and Write.

Guest access blocked by security policy

This error is common on Windows 11: "You cannot access this shared folder because your organization's security policies block unauthenticated guest access." Do these steps on each secondary computer.

  1. Press Win + R, type regedit, then press Enter.

  2. Go to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services > LanmanWorkstation > Parameters.

  3. Right-click a blank area in the right pane, then select New > DWORD (32-bit) Value.

  4. Name it AllowInsecureGuestAuth.

  5. Double-click the new value, set Value data to 1, then select OK.

  6. Close Registry Editor and restart the computer.

"The specified network name is no longer available"

This error appears when you try to open the shared AuctionFlex folder from a secondary computer. Try Fix 1, then Fix 2. Do both on the secondary computer.

Fix 1: Turn on SMB 1.0 support

  1. Go to Control Panel > Programs > Turn Windows features on or off.

  2. Check SMB 1.0/CIFS File Sharing Support, then select OK.

  3. Restart the computer.

Fix 2: Check that the network services are running

  1. Press Win + R, type services.msc, then press Enter.

  2. Find the Server and Workstation services. Both should be Running and set to Automatic.

  3. If a service is stopped, right-click it and select Start. If its startup type is Manual, change it to Automatic.

If the error continues, repeat Fix 2 on the primary computer.

"An extended error has occurred"

This error appears when you map or open the network drive. Try Fix 1 first, because it's faster.

Fix 1: Test with security software off

  1. Temporarily turn off the firewall and antivirus.

  2. Test the connection.

  3. Confirm the network type is Private. Firewall rules are stricter on Public networks.

If turning security software off fixes it, the security software is the problem. Configure it to allow AuctionFlex, or uninstall it.

Fix 2: Update the SMB2 and security signing registry settings

Warning: This fix changes settings on both computers. Start with the primary computer, then do the secondary computer.

On the primary computer:

  1. Press Win + R, type regedit, then press Enter.

  2. Go to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services > LanmanServer > Parameters.

  3. If SMB2 exists, double-click it and set it to 1. If not, right-click a blank area, select New > DWORD (32-bit) Value, name it SMB2 and set it to 1.

On the secondary computer:

  1. Press Win + R, type regedit, then press Enter.

  2. Go to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services > LanmanWorkstation > Parameters.

  3. Right-click EnableSecuritySignature, select Modify, set Value data to 1, then select OK.

  4. Right-click a blank area in the right pane, not on an existing item.

  5. Select New > DWORD (32-bit) Value.

  6. Name it exactly RequireSecuritySignature, then press Enter.

  7. Double-click the new entry, type 0 in Value data, then select OK.

"OLE IDispatch exception code 0"

This error appears when you map the AuctionFlex network drive: "OLE IDispatch exception code 0 from WSHNetwork.MapNetworkDrive." It's usually caused by a stale drive mapping, a firewall block or NetBIOS issues.

Fix 1: Restart or sign out

Restart the computer, or sign out and back in. If the drive was mapped with Reconnect at sign-in, Windows may already have it mapped when AuctionFlex tries to map it again.

Fix 2: Use the IP address instead of the computer name

Map \\ipaddress\auctionflex instead of \\ComputerName\auctionflex. Use your real IP address. Or map the drive from an administrator Command Prompt:

  1. Open Command Prompt as an administrator.

  2. Run net use Z: \\***.***.*.**\auctionflex.

Fix 3: Check the firewall and antivirus

  1. Temporarily turn off the firewall and antivirus to test.

  2. If that fixes it, turn them back on and add an exception for the network drive mapping.

  3. Confirm the network type is Private.

Related articles

Did this answer your question?