Skip to main content

Step 3 - Set Up a Secondary Computer on a Network

Learn how to map the primary computer's folder, install AuctionFlex and set the data path on a secondary computer.

A secondary computer, also called a workstation, connects to the primary computer to use its data. Do these steps on each secondary computer.

Before you start

  • You've turned on sharing settings and set the network type to Private on this computer. See Set Up Your Computers for a Network.

  • The primary computer is set up. See Set Up the Primary Computer on a Network.

  • You have the primary computer's name.

Map the primary computer's folder

This also confirms the secondary computer can see the primary computer on the network.

  1. Open File Explorer.

  2. Select Network in the left pane.

  3. Find the primary computer's name.

  4. Double-click the primary computer's name. The AuctionFlex folder appears.

  5. Right-click the AuctionFlex folder, then select Map network drive.

  6. Choose a drive letter, such as X: or Y:.

  7. Select Reconnect at sign-in. This reconnects the mapped drive each time you sign in.

  8. Select Finish.

Tip: Any available drive letter works. Write down the letter you choose, because you need it when you set the data path.

Important: If the primary computer doesn't appear under Network, stop here. See Networking Troubleshooting for Auction Day.

Install AuctionFlex on a new secondary computer

If AuctionFlex is already installed on this computer, skip to "Set the data path."

  1. On the primary computer, open AuctionFlex and note the version number on the information screen or title bar.

  2. Ask Support for the installer link for that same version.

  3. Run the installer on the secondary computer.

  4. Accept the Terms and Conditions, keep the default destination folder, then select Install.

  5. Select Finish when it completes.

  6. When AuctionFlex asks "Is this a PRIMARY installation?", select No.

  7. When AuctionFlex asks "Is this a secondary installation?", select Yes.

Important: The secondary computer must run the same AuctionFlex version as the primary computer. Different versions can stop AuctionFlex from opening.

Note: Best-practice reminder screens appear next. Read each one, select I Understand, then select Next.

Set the data path

The data path tells AuctionFlex to use the data on the primary computer through the mapped drive.

If AuctionFlex was already installed

  1. Open AuctionFlex on the secondary computer.

  2. When AuctionFlex shows an error and asks about workstation settings, select Yes.

Set the data path

After a new installation, the Workstation Maintenance form opens on its own.

  1. Select the three dots (…) next to the data path field.

  2. In the selection box, scroll to the bottom and open the Drive list.

  3. Select the drive letter you chose when you mapped the folder.

  4. In the upper part of the box, select the data folder.

  5. Select Select. The remaining fields fill in automatically with the mapped drive letter.

  6. If this is a new installation, set the workstation number to 2.

  7. Select Done. AuctionFlex opens and uses the data on the primary computer.

Important: Give each secondary computer its own workstation number: 2, 3, 4 and so on. Duplicate numbers can cause conflicts.

What happens next

  • AuctionFlex runs on the secondary computer using the data stored on the primary computer.

  • For each additional secondary computer, repeat the steps in Set Up Your Computers for a Network, then the steps in this article.

  • Keep each secondary computer connected to the primary computer through its mapped drive.

FAQ

Why does the mapped drive show a red X?
The drive has lost its connection to the primary computer. If you selected Reconnect at sign-in, Windows reconnects the drive when you sign in. Otherwise, select This PC in File Explorer and double-click the drive with the red X. If it still doesn't reconnect, repeat the sharing settings in Set Up Your Computers for a Network, because Windows updates can reset them. Then see Networking Troubleshooting for Auction Day.

Related articles

Did this answer your question?