Skip to main content

Step 2 - Set Up the Primary Computer on a Network

Learn how to share the AuctionFlex folder, find the primary computer's name and check the SMB2 setting.

The primary computer stores all of your AuctionFlex data. Do these steps on the primary computer only.

Before you start

Share the AuctionFlex folder

The AuctionFlex folder is on the C: drive by default.

  1. Open File Explorer.

  2. Select This PC in the left pane.

  3. Open the C: drive.

  4. Right-click the AuctionFlex folder, then select Properties.

  5. Select the Sharing tab, then select Share.

  6. Open the dropdown, select Everyone, then select Add.

  7. Set the permission level for Everyone to Read/Write.

  8. Select Share, then select Done.

Warning: With Read/Write access for Everyone, any computer on this network can change or delete your AuctionFlex data. Keep this network private and secure.

Find the primary computer's name

You need this name when you connect each secondary computer.

  1. Select the Start menu or the search bar on the taskbar.

  2. Type View your PC name, then press Enter.

  3. Find Device name under Device specifications.

  4. Write down the device name.

Tip: You can also go to Settings > System > About to see the device name.

Check the SMB2 registry setting

Server Message Block (SMB) is the Windows feature that shares files between computers. AuctionFlex needs the SMB2 setting turned on.

Warning: Registry Editor changes how Windows runs. Change only the SMB2 value described here.

Note: Newer versions of AuctionFlex (above 9.19) may not need this setting, but network security settings sometimes do. Check it anyway.

  1. Select the Start button, type regedit, then press Enter.

  2. If User Account Control (UAC) asks for permission, select Yes.

  3. In the left pane, expand HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Services > LanmanServer.

  4. Select Parameters.

  5. In the right pane, double-click SMB2.

  6. Check the Value data field.

  7. If the value is 1, select Cancel and close Registry Editor. You're done.

  8. If the value is 0, enter 1 and select OK.

If SMB2 doesn't exist

  1. Right-click a blank area in the right pane, not on an existing item.

  2. Select New > DWORD (32-bit) Value.

  3. Type SMB2 exactly as shown, then press Enter.

  4. Double-click the new SMB2 entry.

  5. Enter 1 in the Value data field, then select OK.

What happens next

  • The AuctionFlex folder is shared and the primary computer is ready for secondary computers.

  • Set up each secondary computer. See Set Up a Secondary Computer on a Network.

Related articles

Did this answer your question?